ProGreen
Auto
Cart 0
ProGreen Ceramic Sealant Concentrate
An advanced polymer matrix reinforced with SiO₂, graphene & titanium technology. Mist it onto wet paint, rinse immediately, towel dry. Sealed, beaded finish.
10% off your first order with code PROGREEN10 · more promos on our socials
Shipping and taxes are calculated at checkout.
32 fl oz 16 ready-to-use bottles $6.81 per mix
How to use it
Dilute 2 oz of the concentrate with 14 oz of water to make a standard 16 oz spray solution.
Clean the vehicle using your normal wash process, then rinse.
Mist two to three sprays per panel directly onto the wet surface.
Use a hose or pressure washer to spread and seal the sealant onto the surface.
Repeat across the vehicle instead of letting the product sit.
Finish with a clean drying towel and work in the shade.
Concentrated
2oz 14oz 16oz
$109.00 the quart. $6.81 the mix. Two finished gallons, sixteen bottles at a time.
Over $531.00 saved per bottle.
Promo code
Enter the code at checkout. One use per customer.
Your quart
Two ounces of concentrate is one 16 oz spray bottle. A full quart is sixteen of them: two gallons of sealant, up to 96 cars.
32 oz · 16 bottles · up to 96 cars
Mix calculator
Slide the concentrate. The numbers do the rest.
2 oz concentrate + 14 oz water = one 16 oz bottle. Each mixed bottle covers up to six cars.
From the label
Who it is for
Car washes
Offer a ceramic sealant finish as part of your car wash service. For hand application, mist the wet panel, use a hose or pressure washer to spread and seal the sealant, then towel dry. One quart covers up to 96 cars, or about $1.14 per car at that coverage. Ask our team about adding ProGreen to your car wash machinery and the right setup for your equipment.
Dealer & case pricingDIY at home
Wash your own car and add a ceramic finish with a spray bottle, a hose, and a drying towel. Mix 2 oz of concentrate with 14 oz of water, shake, and mist the wet car panel by panel. Use a hose or pressure washer to spread and seal the sealant, then towel dry. No buffing or curing time. Each 16 oz mix covers up to six cars; one quart makes sixteen mixes for up to 96 cars.
Get the quart
Good to know
One 16 oz ready-to-use bottle covers up to six cars. A 32 fl oz quart makes sixteen of those bottles—two full gallons of ready-to-use sealant, covering up to 96 cars.
Reapplication frequency varies by environmental exposure. Though our formulation is built to last, for optimal performance and protection, we recommend reapplying every 4-6 washes.
Yes. The formula is pH neutral and safe on all exterior surfaces, so you can mist the whole vehicle—paint, glass, trim, and wheels—without masking anything off.
An advanced polymer matrix reinforced with SiO₂, graphene & titanium technology. Titanium boosts UV protection, hardness, and gloss; graphene improves heat dissipation and reduces water spotting while adding flexibility and slickness. Made in the USA.
No. A spray bottle, a hose, and a drying towel. There is no buffing, curing, or paste work—the rinse does the leveling, which is why it fits inside a normal wash instead of adding an afternoon.